Omniadisce

Op-amps, sensors and signal conditioning

Lesson Intermediate

Join free to take this lesson

Anyone can look around, but taking a lesson needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

14 steps ยท about 60 min

By the end you can

  • Apply the ideal op-amp rules under negative feedback
  • Design inverting, non-inverting and summing amplifiers
  • Account for real op-amp limits: bandwidth, slew rate and offset
  • Size an ADC's resolution and sample rate

Who it is for: Beginners who have done Unit 1 (Start here); no other physics or electronics needed. Each unit builds on the one before, every calculation has a worked-equation guide and hints, and the labs run in your browser.

The steps

  1. The op-amp
  2. No feedback
  3. Negative feedback: the golden rules
  4. Three classic amplifiers
  5. Non-inverting gain
  6. Amplify a sensor
  7. Summing, difference and instrumentation amplifiers
  8. A summing amplifier
  9. Real op-amps
  10. Bandwidth
  11. From voltage to number
  12. ADC resolution
  13. Sampling audio
  14. Feedback, again

Discussion 0 comments

Log in to join the discussion.

× Enlarged view