Two LEDs in parallel
Power two LEDs from the 5 V supply so that each one carries between 8 mA and 15 mA. Use exactly two LEDs, and keep the supply at 5 V. You will need to add resistors โ think about why each LED shouldโฆ
Solve problems, take step-by-step lessons and courses, and test your ideas in live simulations, on any subject. Free, and the first lesson of every course needs no account.
Power two LEDs from the 5 V supply so that each one carries between 8 mA and 15 mA. Use exactly two LEDs, and keep the supply at 5 V. You will need to add resistors โ think about why each LED shouldโฆ
Build a voltage divider from the 12 V supply using exactly two resistors, so one of the resistors has 4 V (ยฑ0.1 V) across it. The supply must deliver no more than 5 mA, and at least 0.1 mA (so theโฆ
A 9 V battery and a red LED are on the canvas. Add a current-limiting resistor and wire them into a single loop so the LED lights up without burning out: the LED current must be between 5 mA and 20โฆ