A tank $1\ \text{m}$ long and $0.5\ \text{m}$ wide (a floor of $0.5\ \text{m}^2$) stands on a stand and drains through a round hole $2\ \text{cm}$ across near its floor. Water leaves the hole at Torricelli's speed $v = \sqrt{2 g h}$, where $h$ is the depth of water above the hole, so the tank drains quickly at first and more slowly as it empties.
The level in the simulation runs 60 times faster than real time; the readout shows the draining time it stands for, and when the tank runs dry. Try different starting depths and hole sizes.
Principles it rests on
Torricelli's law: $v = \sqrt{2 g h}$.
Conservation of volume: $A \frac{dh}{dt} = -a v$, with $A$ the tank's floor and $a$ the hole's area.
Question
If you double the starting depth of the water, how many times longer does the tank take to empty?
Drag to orbit ยท scroll to zoom ยท right-drag to pan
Experiment with the settings
Hints
Solution
Write the rate of change of the water level and integrate it from the starting depth to zero.
Step 1: The level's rate of change $$A \frac{dh}{dt} = -a\sqrt{2 g h}$$
Step 2: Separate and integrate $$\int_{h_0}^{0} \frac{dh}{\sqrt{h}} = -\frac{a}{A}\sqrt{2g}\,T \quad\Rightarrow\quad T = \frac{A}{a}\sqrt{\frac{2 h_0}{g}}$$
Step 3: Compare $T$ grows with $\sqrt{h_0}$, so doubling $h_0$ multiplies it by $\sqrt{2} \approx 1.41$.
Answer: about 1.4 times as long. From $1\ \text{m}$ deep this tank empties in $\frac{0.5}{3.14\times10^{-4}}\sqrt{\frac{2}{9.81}} \approx 720\ \text{s}$; from $2\ \text{m}$, in about $1020\ \text{s}$. A real sharp-edged hole lets out only about $0.61$ of Torricelli's flow (its discharge coefficient), which makes every time longer but leaves the ratio the same.
Discussion 0 comments
Log in to join the discussion.