Omniadisce

What happens behind a post in a faster flow?

Simulation Intermediate New no attempts yet
Interactive 3D simulation Read the problem, then try your answer in the simulation below. Go to it
A laboratory flume is filled with glycerol, which is about 1100 times thicker than water for its weight, so the flow stays slow enough to watch. It flows past a round post $0.2\ \text{m}$ across. The flow field is computed live on a slice through the liquid; streaks of dye and a faint colour tint show how it swirls behind the post.

Whether the flow stays smooth depends on the Reynolds number $Re = \frac{v D}{\nu}$: the flow speed $v$ times the post's width $D$, divided by the liquid's kinematic viscosity, here $\nu = 1.12 \times 10^{-3}\ \text{m}^2/\text{s}$. The readout shows it. Start at $0.18\ \text{m/s}$, then raise the speed and give the flow a few seconds to settle.
Principles it rests on
  • The Reynolds number compares inertia with viscosity.
  • Behind a cylinder, the wake becomes unsteady above $Re \approx 47$ and sheds a von K\'arm\'an vortex street.
Question
You raise the flow speed from 0.18 to 0.45 m/s. What happens in the wake behind the post?
Drag to orbit ยท scroll to zoom ยท right-drag to pan
Experiment with the settings

Sources & evidence

  1. Williamson, C. H. K., Vortex dynamics in the cylinder wake, Annual Review of Fluid Mechanics 28 (1996)
  2. Lattice-Boltzmann method: https://physics.weber.edu/schroeder/fluids/
Nobody has tried this yet.Be the first. Your answer starts the stats.

Only each person's first answer, given before viewing the solution, is counted.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view