Two cubes $6\ \text{cm}$ on each side, one of copper and one of glass, start at room temperature, $20\ °\text{C}$. Both are set on a steel hot plate held at $150\ °\text{C}$, in still air.
Copper conducts heat with $k = 401\ \text{W/(m·K)}$ and has a density of $8960\ \text{kg/m}^3$ and a specific heat of $385\ \text{J/(kg·K)}$. Glass has $k = 1.0\ \text{W/(m·K)}$, a density of $2500\ \text{kg/m}^3$ and a specific heat of $840\ \text{J/(kg·K)}$.
In the simulation, heat runs 60 times faster than real time, so the 8-second run shows 8 minutes. Turn on the thermal view and cut the blocks open to see inside them.
Principles it rests on
Heat flows through a solid at a rate set by its conductivity $k$; how fast its temperature changes also depends on how much heat it must store, $\rho c$.
Together they give the thermal diffusivity $\alpha = \frac{k}{\rho c}$.
In a time $t$, heat spreads about $\sqrt{\alpha t}$ into a body.
Question
After 8 minutes on the plate, how do the temperatures in the middle of the two blocks compare?
Drag to orbit · scroll to zoom · right-drag to pan
Step 2: How far heat spreads in 8 minutes ($t = 480\ \text{s}$) $$\sqrt{\alpha_{Cu}\, t} \approx 24\ \text{cm}, \qquad \sqrt{\alpha_{glass}\, t} \approx 1.5\ \text{cm}$$
The copper block is only $6\ \text{cm}$ tall, so heat spreads all through it and it warms evenly as heat crosses in from the plate: its middle reaches about $138\ °\text{C}$. In glass the heat gets only about $1.5\ \text{cm}$ up from the hot face, so the middle, $3\ \text{cm}$ up, has only reached about $37\ °\text{C}$ while the glass near its bottom is above $100\ °\text{C}$.
Answer: the copper block's middle is far warmer. This is why a metal pan heats evenly but a glass dish can crack on a hot hob: its bottom expands while its top has not yet warmed.
Discussion 0 comments
Log in to join the discussion.