A $2\ \text{kg}$ wooden block is placed at rest on a ramp inclined at $\theta = 30°$. The ramp's surface is very rough (coefficient $1$), so the friction between them is set by the block's own coefficient of friction $\mu$ (the simulator multiplies the two coefficients).
Choose $\mu$ so that the block stays where it is: it may move no more than $5\ \text{cm}$ in $3\ \text{s}$.
Principles it rests on
Resolve the weight $mg$ into components along and perpendicular to the slope.
The normal force balances the perpendicular component: $N = mg\cos\theta$.
Static friction can supply any force up to $f_{max} = \mu N$.
Question
What is the smallest friction coefficient $\mu$ that keeps the block from sliding?
Your setup must satisfy
The block moves less than 5 cm in 3 s
Drag to orbit · scroll to zoom · right-drag to pan
Your settings
Hints
Solution
Step 1: Free-body diagram Three forces act on the block: its weight $mg$ (straight down), the normal force $N$ (perpendicular to the ramp) and friction $f$ (up the slope, opposing the tendency to slide).
Step 2: Resolve the weight $$\text{down the slope: } mg\sin\theta, \qquad \text{into the slope: } mg\cos\theta$$ So $N = mg\cos\theta$.
Step 3: Condition for not sliding Friction must be able to balance the downhill component: $$mg\sin\theta \le \mu\,mg\cos\theta \quad\Rightarrow\quad \mu \ge \tan\theta$$ The mass cancels: a heavy block and a light block behave the same.
Step 4: Numbers $$\mu \ge \tan 30° = 0.577$$
Answer: $\mu \ge 0.58$. In the simulation the block slides at $\mu = 0.57$ and holds from $\mu = 0.58$ upwards.
Why the starting value fails: with $\mu = 0.3$ the block accelerates down the ramp at about $a = g(\sin\theta - \mu\cos\theta) \approx 2.4\ \text{m/s}^2$.
How others did
Nobody has tried this yet.Be the first. Your answer starts the stats.
Only each person's first answer, given before viewing the solution, is counted.
Discussion 0 comments
Log in to join the discussion.