Step 1: Density of the air$$\rho = \frac{70\,107}{287.05 \times (35 + 273.15)} = 0.793\ \text{kg/m}^3$$
That is $35\%$ less than at sea level: high altitude lowers the pressure, and heat lowers the density further.
Step 2: Thrust available$$T_{max} = 30 \times \frac{0.793}{1.225} = 19.4\ \text{N}$$
Step 3: Hover limit$$m_{hover} = \frac{T_{max}}{g} = \frac{19.4}{9.81} = 1.98\ \text{kg}$$
The starting $2.6\ \text{kg}$ needs $25.5\ \text{N}$ just to hang in the air: it cannot leave the ground.
Step 4: Enough margin to climb in timeAt full thrust the upward acceleration is $a = T_{max}/m - g$. Near the hover limit this is small:
- $m = 1.9\ \text{kg}$: $a = 19.4/1.9 - 9.81 = 0.41\ \text{m/s}^2$. After $6\ \text{s}$: $\tfrac{1}{2} \times 0.41 \times 6^2 = 7.4\ \text{m}$, too low.
- $m = 1.85\ \text{kg}$: $a = 0.68\ \text{m/s}^2$, which reaches $9\ \text{m}$ after $\sqrt{2 \times 9/0.68} = 5.1\ \text{s}$. Just in time.
Answer: about $1.85\ \text{kg}$ at most, e.g. $1.6\ \text{kg}$ (acceleration $2.3\ \text{m/s}^2$, comfortably in time). The simulation agrees: $1.85\ \text{kg}$ passes, $1.9\ \text{kg}$ only reaches $7.1\ \text{m}$ by $t = 6\ \text{s}$, and $2.6\ \text{kg}$ never takes off.
At sea level the same drone could hover with up to $30/9.81 = 3.06\ \text{kg}$. Pilots call this the "hot and high" problem: aircraft and helicopters also lose lift and engine power in hot air at altitude.
Discussion 0 comments
Log in to join the discussion.