Omniadisce

Protect a transistor from a relay coil

Circuit Advanced New no attempts yet
A transistor switches a relay coil: $120\ Ω$ of winding with $100\ \text{mH}$ of inductance. When the transistor turns off, the coil's current cannot stop instantly ($v = L\,di/dt$): the coil drives its collector to hundreds of volts and destroys the transistor.

A flyback diode across the coil gives the current a safe loop to die away in. It must be wired so it does *nothing* while the coil is on (reverse-biased), and only conducts after switch-off.

How to do it:
1. Add a diode (right-click the canvas, then Active Components, then Diode) from the bottom of the coil (the transistor's collector) to the top of the coil (+12 V).
2. Orientation matters: the diode's bar (its cathode) must face +12 V, so it does not conduct while the coil is on.
3. If the coil current collapses and the diode carries a large current, it is the wrong way round: delete it and draw it the other way.
4. Press Check answer.
Principles it rests on
Inductor voltage $v = L\,di/dt$; diode polarity; energy stored in an inductor $\tfrac12 L I^2$.
Question
Add one diode across the coil so the relay still pulls in (90 mA to 105 mA) and the diode carries no current while the coil is on.

Join free to take this activity

Anyone can look around, but taking an activity needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

It is part of the course Electrical engineering: from first circuits to the power grid.

Nobody has tried this yet.Be the first. Your answer starts the stats.

Only each person's first answer, given before viewing the solution, is counted.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view