A uniform disc flywheel ($m = 2\ \text{kg}$, radius $r = 0.5\ \text{m}$) turns without friction on an axle through its centre, starting from rest. A motor applies a constant torque $\tau$ for $2\ \text{s}$ and then switches off.
Choose $\tau$ so that the flywheel ends up turning at exactly one revolution per second ($360ยฐ/\text{s}$), passing $180ยฐ/\text{s}$ halfway through the spin-up.
Principles it rests on
Newton's second law for rotation: $\tau = I\alpha$.
Moment of inertia of a uniform disc about its axis: $I = \tfrac{1}{2} m r^2$.
Constant angular acceleration from rest: $\omega = \alpha t$. Once the torque stops, $\omega$ stays constant (no friction).
Question
What motor torque $\tau$ is needed?
Your setup must satisfy
Halfway through the spin-up (t = 1 s) it turns at 160โ200 ยฐ/s
After the motor stops it keeps turning at 340โ380 ยฐ/s
Drag to orbit ยท scroll to zoom ยท right-drag to pan
Your settings
Hints
Solution
Step 1: Moment of inertia $$I = \tfrac{1}{2} m r^2 = \tfrac{1}{2} \times 2 \times 0.5^2 = 0.25\ \text{kgยทm}^2$$
Step 2: Required angular acceleration Target: one revolution per second, $\omega = 2\pi\ \text{rad/s}$, reached after $t = 2\ \text{s}$: $$\alpha = \frac{\omega}{t} = \frac{2\pi}{2} = \pi\ \text{rad/s}^2$$
Step 4: Check the halfway point At $t = 1\ \text{s}$: $\omega = \pi\ \text{rad/s} = 180ยฐ/\text{s}$ ?. After the motor stops, nothing slows the wheel, so it keeps $360ยฐ/\text{s}$.
Answer: $\tau \approx 0.785\ \text{Nยทm}$. The checks accept $340$ to $380ยฐ/\text{s}$, i.e. about $0.75$ to $0.82\ \text{Nยทm}$.
Same result from angular impulse: $\tau\,\Delta t = I\,\Delta\omega \Rightarrow \tau = 0.25 \times 2\pi / 2 = 0.785\ \text{Nยทm}$.
Why the starting value fails: $0.3\ \text{Nยทm}$ gives $\alpha = 1.2\ \text{rad/s}^2$ and only $2.4\ \text{rad/s} \approx 138ยฐ/\text{s}$ after $2\ \text{s}$.
How others did
Nobody has tried this yet.Be the first. Your answer starts the stats.
Only each person's first answer, given before viewing the solution, is counted.
Discussion 0 comments
Log in to join the discussion.