In zero gravity, a block of mass $m = 1\ \text{kg}$ is attached to a fixed anchor by a spring with rest length $0.5\ \text{m}$. The block is pulled out to $0.8\ \text{m}$ from the anchor and released from rest.
Choose the spring constant $k$ so that the block makes exactly one full oscillation per second: it must be at the opposite extreme ($x \approx 0.2\ \text{m}$) at $t = 0.5\ \text{s}$ and back at its start ($x \approx 0.8\ \text{m}$) at $t = 1\ \text{s}$.
Principles it rests on
Hooke's law: a spring stretched by $x$ pulls back with $F = -kx$.
A mass on a spring performs simple harmonic motion with angular frequency $\omega = \sqrt{k/m}$ and period $T = 2\pi\sqrt{m/k}$.
The period does not depend on the amplitude.
Question
What spring constant $k$ gives a period of exactly 1 s?
Your setup must satisfy
At t = 0.5 s the block is at the opposite extreme (x โ 0.2 m)
At t = 1 s the block is back at its start (x โ 0.8 m)
Drag to orbit ยท scroll to zoom ยท right-drag to pan
Your settings
Hints
Solution
Step 1: Equation of motion Measured from the equilibrium position (the rest length, $0.5\ \text{m}$ from the anchor), Newton's second law gives $$m\ddot{x} = -kx \quad\Rightarrow\quad x(t) = A\cos(\omega t), \qquad \omega = \sqrt{k/m}$$ with amplitude $A = 0.8 - 0.5 = 0.3\ \text{m}$.
Step 2: Period $$T = \frac{2\pi}{\omega} = 2\pi\sqrt{\frac{m}{k}}$$
Step 4: Check the positions Distance from the anchor: $0.5 + 0.3\cos(2\pi t)$. At $t = 0.5\ \text{s}$: $0.5 + 0.3\cos\pi = 0.2\ \text{m}$ ?. At $t = 1\ \text{s}$: $0.5 + 0.3\cos 2\pi = 0.8\ \text{m}$ ?.
Answer: $k \approx 39.5\ \text{N/m}$. The checks allow $\pm 3\ \text{cm}$, which the simulation accepts for about $37$ to $42\ \text{N/m}$.
Why the starting value fails: with $k = 20\ \text{N/m}$ the period is $2\pi\sqrt{1/20} = 1.40\ \text{s}$, so the block is still on its way back at $t = 1\ \text{s}$.
How others did
Nobody has tried this yet.Be the first. Your answer starts the stats.
Only each person's first answer, given before viewing the solution, is counted.
Discussion 0 comments
Log in to join the discussion.