Omniadisce

Pressure in the pipes

Lesson Beginner

Join free to take this lesson

Anyone can look around, but taking a lesson needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

6 steps ยท about 15 min ยท runs in the Water supply lab

Water reaches your tap by gravity alone, if the pipes are wide enough.

The idea

A gravity system needs no pumps: the reservoir's water level is the head H. At a house the pressure is the head minus the ground level, in metres of water (10 m โ‰ˆ 1 bar). With no flow, that is the static pressure.

Flowing water loses head to friction. Hazenโ€“Williams: $h_f = 10.67 L Q^{1.852} / (C^{1.852} d^{4.87})$: the loss grows almost with the square of the flow and falls steeply with the diameter.

Each check shows a scenario: peak hour (twice the average demand), a fire at the school (20 L/s on top), and the night.

By the end you can

  • Pressure = reservoir head โˆ’ ground level, in metres of water.
  • Flowing water loses head to friction, much more at high flow.
  • Doubling the diameter cuts the loss about 30 times: size mains for the fire.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view