Omniadisce

Bending moment

Lesson Beginner

Join free to take this lesson

Anyone can look around, but taking a lesson needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

6 steps ยท about 12 min ยท runs in the Beam lab

A beam breaks where it bends hardest. This lesson finds that place.

The idea

Inside the beam, the material resists turning: the bending moment. Cut the beam anywhere, and the moment there equals the moment of all the forces on one side of the cut.

Under a point load the moment grows linearly from each support to a peak under the load: $M_{max} = R_A \cdot a = P \cdot a \cdot b / L$

The moment diagram (bottom chart) is drawn on the tension side, as European engineers do.

By the end you can

  • The bending moment is how hard a beam is being bent at a point, in kNm.
  • To find it, cut the beam and add up force ร— distance for everything on one side of the cut.
  • Under one load, the moment diagram is a triangle peaking under the load.
  • A load bends a beam most at midspan, where $M = P L / 4$.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view