Omniadisce

Spreading the load

Lesson Beginner

Join free to take this lesson

Anyone can look around, but taking a lesson needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

4 steps ยท about 15 min ยท runs in the Pavement lab

A road is a stack of layers, each spreading the load for the one below.

The idea

A tyre presses on the road at 700 kPa; the soil underneath can take only a few tens of kPa without rutting. Each layer spreads the load over a wider area: stiff layers spread it most.

Odemark's equivalent thickness: a layer of thickness h and modulus Eโ‚ acts like $h_e = 0.9\, h\, (E_1 / E_2)^{1/3}$ of the material below. Then Boussinesq's half-space gives the strains.

Two strains decide the life: tension at the bottom of the asphalt (fatigue cracking) and compression at the top of the subgrade (rutting).

By the end you can

  • Each layer spreads the load; stiff layers spread it most.
  • Asphalt acts like a much thicker layer of softer material: $h_e = 0.9 h (E_1/E_2)^{1/3}$.
  • Soft ground needs capping first; thicker asphalt multiplies the life.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view