Omniadisce

Slab, columns and ground

Lesson Beginner

Join free to take this lesson

Anyone can look around, but taking a lesson needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

3 steps ยท about 20 min ยท runs in the Concrete lab

Every part of a building depends on every other part. Change one and the rest notice.

The idea

Everything is connected. A thicker slab spans further but weighs more, and every column and footing carries that weight. Bigger columns are stronger, and they also stop the slab punching through around them: $v_{Ed} = \beta V_{Ed} / (u_1 d) \le v_{Rd,c}$

Edge and corner columns punch first: the load on them is lopsided (ฮฒ = 1.4 and 1.5) and their control perimeter $u_1$ is shorter.

This five-storey office has 200 mm slabs and 300 mm columns everywhere. Open โ€œWhy?โ€ on each failing check.

By the end you can

  • A flat-slab building must pass slab span, punching shear and column checks.
  • Bigger columns carry more and stop punching; thicker slabs span further but weigh more.
  • Design is finding the cheapest combination that passes everything.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view