Omniadisce

Why concrete needs steel

Lesson Beginner

Join free to take this lesson

Anyone can look around, but taking a lesson needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

9 steps ยท about 15 min ยท runs in the Concrete lab

Concrete is cheap stone, steel is strong wire. Together they build most of the world.

The idea

Concrete is strong in compression ($f_{ck}$ = 30 MPa for C30/37) but weak in tension ($f_{ctm}$ โ‰ˆ 2.9 MPa). A plain concrete beam cracks at its bottom face and snaps. Steel bars near the bottom take over the tension once it cracks.

At failure the concrete above the neutral axis carries a compression force $0.8\,x\,b\,f_{cd}$, the bars a tension $A_s f_{yd}$. The two are equal, and their distance apart, the lever arm $z = d - 0.4x$, gives the moment resistance: $M_{Rd} = A_s f_{yd} (d - 0.4 x)$

Design strengths: $f_{cd} = 0.85 \times 30 / 1.5 = 17$ MPa, $f_{yd} = 500 / 1.15 = 435$ MPa. Turn on โ€œSee the steelโ€ to look inside.

By the end you can

  • Concrete is strong when squashed, weak when pulled: it cracks where it is stretched.
  • Steel bars carry the pull; the concrete above the neutral axis carries the push.
  • Strength = steel force ร— lever arm: $M_{Rd} = A_s f_{yd} (d - 0.4x)$.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view