Omniadisce

A 2 kW kettle on 230 V mains

Circuit Beginner New no attempts yet
Mains voltage swings between $+325\ \text{V}$ and $-325\ \text{V}$ fifty times a second, yet everyone calls it "230 V". The 230 V is the RMS (root-mean-square) value: the DC voltage that would heat a resistor equally. For a sine wave, $V_{RMS} = V_{peak}/\sqrt{2}$.

The simulator's AC source is set by its peak (amplitude), 325 V.

How to do it:
1. The kettle's heating depends on the RMS voltage, 230 V, not on the 325 V peak.
2. R = Vยฒ รท P = 230ยฒ รท 2000.
3. Set the resistor and press Check answer.
Principles it rests on
RMS values of sinusoids; average power in a resistor $P = V_{RMS}^2/R$.
Question
Choose the kettle element's resistance so it draws 2 kW (ยฑ5 %) from the mains.

Join free to take this activity

Anyone can look around, but taking an activity needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

It is part of the course Electrical engineering: from first circuits to the power grid.

Nobody has tried this yet.Be the first. Your answer starts the stats.

Only each person's first answer, given before viewing the solution, is counted.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view