Omniadisce

Change a part's value: make the LED brighter

Circuit Beginner New no attempts yet
The second skill in the simulator: changing a part's value.

This LED is lit through a 1000 Ω (1 kΩ) resistor, and only about 7 mA flows. A resistor limits the current: a smaller resistance lets more current through, so the LED gets brighter. (Unit 2 explains exactly why; here you only practise using the simulator.)

The LED should get between 12 mA and 18 mA for full brightness.

How to do it:
1. Hover the mouse over the LED and read its current (about 7 mA).
2. Double-click the resistor. In the box that opens, type a smaller resistance (you can type 470 or 0.47k) and press OK.
3. Hover over the LED again. Is the current between 12 mA and 18 mA? If not, adjust and try again.
4. Press Check answer.
Principles it rests on
A smaller resistance lets more current through.
Question
Change the resistor's value so the LED current is between 12 mA and 18 mA.

Join free to take this activity

Anyone can look around, but taking an activity needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

It is part of the course Electrical engineering: from first circuits to the power grid.

Nobody has tried this yet.Be the first. Your answer starts the stats.

Only each person's first answer, given before viewing the solution, is counted.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view