Omniadisce

Buckling

Lesson Beginner

Join free to take this lesson

Anyone can look around, but taking a lesson needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

5 steps ยท about 15 min ยท runs in the Bridge lab

Pushed members don't break. They buckle, and much sooner than you'd think.

The idea

A slender compression member fails long before the steel yields: it bows sideways and buckles. Euler worked out the critical load of a pin-ended strut: $N_{cr} = \pi^2 E I / L^2$

Eurocode reduces the squash load $A f_y$ by a factor $\chi$ that depends on the slenderness.

By the end you can

  • A pushed, slim member fails by buckling: it bows out sideways long before the steel is crushed.
  • Euler's buckling load: $N_{cr} = \pi^2 E I / L^2$. Twice as long, a quarter of the load.
  • Pulled members can't buckle and can be slim; pushed members need bigger sections.
  • Sizing each member for its own force saves material and money.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view