Omniadisce

Pulling and pushing

Lesson Beginner

Join free to take this lesson

Anyone can look around, but taking a lesson needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

5 steps ยท about 12 min ยท runs in the Bridge lab

Every member of a truss is either pulled or pushed. Knowing which is half of designing it.

The idea

Truss members carry only axial force: tension (pulled) or compression (pushed). A truss bridge acts like a deep beam: the top chord is squeezed, the bottom chord stretched.

Tension members can be slim; compression members must not buckle, so they are chunkier.

By the end you can

  • Truss members only pull (tension) or push (compression) along their length.
  • A truss bridge bends like a deep beam: top chord pushed, bottom chord pulled.
  • The forces change as traffic moves; the midspan chord is pulled hardest with the load in the middle.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view