A $1\ \text{kg}$ ball hangs $L = 1.5\ \text{m}$ below a pivot on a rigid, massless rod (the rod can push as well as pull). At the bottom of its swing it is given a horizontal kick of speed $v_0$.
If the kick is strong enough the ball swings all the way over the top of the circle; if not, it swings back.
Principles it rests on
Conservation of mechanical energy: $\tfrac{1}{2}mv^2 + mgh$ is constant when only gravity does work (the rod's force is always perpendicular to the motion).
A rigid rod can support the ball at the top, so the ball only needs to arrive there with speed $\ge 0$. (A string would need tension $\ge 0$, i.e. $v_{top}^2 \ge gL$.)
Question
What is the smallest kick speed $v_0$ that takes the ball over the top? Set a speed that works.
Your setup must satisfy
The ball goes over the top of the circle (centre reaches 3.98 m; the top is at 4 m)
The ball never touches the ground
Drag to orbit ยท scroll to zoom ยท right-drag to pan
Your settings
Hints
Solution
Step 1: Energy at the bottom and at the top The top of the circle is $2L = 3\ \text{m}$ above the bottom. Energy conservation: $$\tfrac{1}{2} m v_0^2 = \tfrac{1}{2} m v_{top}^2 + m g (2L)$$
Step 2: Minimum condition With a rigid rod the ball just needs to reach the top, so $v_{top} \ge 0$: $$v_0^2 \ge 4 g L \quad\Rightarrow\quad v_0 \ge \sqrt{4 g L} = \sqrt{4 \times 9.81 \times 1.5} = 7.67\ \text{m/s}$$
Answer: $v_0 \approx 7.7\ \text{m/s}$ or more. In the simulation $7.65\ \text{m/s}$ stalls just short of the top and $7.70\ \text{m/s}$ goes over.
Why the starting value fails: with $v_0 = 6\ \text{m/s}$ the ball rises only $h = v_0^2/2g = 1.83\ \text{m}$, short of the $3\ \text{m}$ needed, and swings back.
Extension: if the rod were replaced by a string, the string must stay taut at the top: $mg \le m v_{top}^2/L$, so $v_0 \ge \sqrt{5gL} = 8.58\ \text{m/s}$.
How others did
Nobody has tried this yet.Be the first. Your answer starts the stats.
Only each person's first answer, given before viewing the solution, is counted.
Discussion 0 comments
Log in to join the discussion.