Omniadisce

Walls without a base

Lesson Beginner

Join free to take this lesson

Anyone can look around, but taking a lesson needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

4 steps ยท about 15 min ยท runs in the Retaining walls lab

Some walls stand on nothing but the soil in front of their toes.

The idea

Next to a street there is no room for a base. A sheet-pile wall is driven first, then the soil in front is dug out. It stands as a cantilever because the soil in front of its toe pushes back with the passive pressure $K_p = \frac{1 + \sin\phi'}{1 - \sin\phi'}$, many times the active.

The required depth comes from moments about the toe: passive in front against active behind. Then 20% more for the toe reaction.

By the end you can

  • Sheet piles are driven first and stand on the soil in front of their toes.
  • Passive pressure: K_p = (1 + sin ฯ†')/(1 โˆ’ sin ฯ†'), many times the active.
  • Deeper embedment to stand; a stiffer section to limit sway.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view