Omniadisce

Set an RC time constant

Circuit Beginner New no attempts yet
A push-button needs a small delay so its bounce is ignored. The delay comes from an RC circuit: a resistor charging a $10\ \mu\text{F}$ capacitor.

The capacitor charges along $v(t) = V\,(1 - e^{-t/\tau})$ with time constant $\tau = RC$. After one $\tau$ it reaches 63 % of the supply; after $5\tau$ it is practically full.

How to do it:
1. ฯ„ = R ร— C, so R = ฯ„ รท C.
2. Convert to base units: 4.7 ms = 0.0047 s, and 10 ยตF = 0.00001 F.
3. Divide, set the resistor, and press Check answer.
Principles it rests on
First-order RC circuits: $\tau = RC$.
Question
Choose the resistor so the time constant is 4.7 ms (ยฑ5 %) with the 10 ยตF capacitor.

Join free to take this activity

Anyone can look around, but taking an activity needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

It is part of the course Electrical engineering: from first circuits to the power grid.

Nobody has tried this yet.Be the first. Your answer starts the stats.

Only each person's first answer, given before viewing the solution, is counted.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view