Omniadisce

Two heating elements sharing the load

Circuit Beginner New no attempts yet
A 6 W heater must be built from two identical resistors in parallel, because each one is only rated for $5\ \text{W}$. In parallel, both resistors get the full supply voltage, and the supply current is the sum of their currents.

The starter uses two 24 ฮฉ resistors: 12 W in total, and each one cooks at 6 W, above its rating.

How to do it:
1. Each resistor must make half of 6 W: 3 W.
2. Each has the full 12 V across it, so R = Vยฒ รท P = 144 รท 3.
3. Set both resistors to that value. Hover over each to check its power is under 5 W.
4. Press Check answer.
Principles it rests on
Parallel branches share the same voltage; Kirchhoff's current law; $P = V^2/R$ per branch.
Question
Choose the two equal resistors so the pair makes 6 W (ยฑ0.2 W) on 12 V, and neither exceeds 5 W.

Join free to take this activity

Anyone can look around, but taking an activity needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

It is part of the course Electrical engineering: from first circuits to the power grid.

Nobody has tried this yet.Be the first. Your answer starts the stats.

Only each person's first answer, given before viewing the solution, is counted.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view