Omniadisce

Pulling steel apart

Lesson Beginner

Join free to take this lesson

Anyone can look around, but taking a lesson needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

6 steps ยท about 12 min ยท runs in the Testing lab

Every number in a design comes from a test. Here you run one.

The idea

Design values come from tests. A tensile test pulls a bar until it breaks while the machine records force F and extension ฮ”L. Engineers turn them into stress and strain: $\sigma = F / A_0$ and $\varepsilon = \Delta L / L_0$

The straight start of the curve gives the stiffness $E = \sigma / \varepsilon$; the flat plateau is the yield strength $f_y$; the top of the curve is the tensile strength $f_u$.

Run the test (โ–ถ), then read the chart. The zoomed chart helps with E.

By the end you can

  • Stress = force รท area; strain = stretch รท length.
  • The tensile curve gives stiffness E, yield strength f_y and tensile strength f_u.
  • Grades are characteristic values: 95% of bars are stronger.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view