Omniadisce

Wind load calculator: peak velocity pressure (Eurocode 1)

Enter the basic wind velocity for your site, the terrain category and the height. The calculator works out the peak velocity pressure q_p(z) step by step, as EN 1991-1-4 section 4 does.

Learn how this works
Site

Results

Peak velocity pressure q_p(z)0.994 kN/mยฒ
Basic velocity pressure q_b0.456 kN/mยฒ
Exposure factor c_e = q_p / q_b2.182
Mean wind velocity v_m24.42 m/s
Roughness factor c_r(z)0.905
Terrain factor k_r0.2154
Turbulence intensity I_v0.238
Height used (at least z_min)20.0 m
q_p against height (largest 50 m at 1.31 kN/mยฒ)
0.5836 kN/mยฒ1.3102 kN/mยฒ

How it is worked out

Peak velocity pressure, step by step

q_p(z) = [1 + 7 I_v(z)] ยฝ ฯ v_m(z)ยฒ, v_m = c_r v_b, c_r = k_r ln(z / z_0), I_v = 1 / ln(z / z_0)

Terrain III: z_0 = 0.3 m, z_min = 5 m; k_r = 0.19 ร— (0.3 / 0.05)^0.07 = 0.2154; c_r = 0.2154 ร— ln(20 / 0.3) = 0.905; v_m = 0.905 ร— 27 = 24.42 m/s; I_v = 0.238; q_p = (1 + 7 ร— 0.238) ร— 0.5 ร— 1.25 ร— 24.42ยฒ = 994 Pa.

The pressure of the strongest gusts at that height: rougher ground slows the mean wind but makes it gustier. Multiply by a pressure coefficient c_pe (and c_s c_d) to get the pressure on a wall or roof.

Key formulas

Peak velocity pressure (4.8)
q_p(z) = [1 + 7 I_v(z)] ยฝ ฯ v_m(z)ยฒ
Mean wind (4.3)
v_m(z) = c_r(z) c_o(z) v_b
Roughness factor (4.4)
c_r(z) = k_r ln(z / z_0), k_r = 0.19 (z_0 / 0.05)^0.07
Turbulence intensity (4.7)
I_v(z) = k_I / (c_o ln(z / z_0))
Assumptions
  • Flat terrain (orography factor c_o = 1), air density ฯ = 1.25 kg/mยณ, turbulence factor k_I = 1.
  • v_b is the basic wind velocity from the national annex map (fundamental value with direction and season factors).
Learn how this worksBuild it yourself in the Wind and Earthquake lab, with guided lessons and challenges.
× Enlarged view