Omniadisce

Tune a resonant circuit to 1 kHz

Circuit Intermediate New no attempts yet
An inductor and a capacitor swap energy back and forth: the capacitor's electric field empties into the inductor's magnetic field and back. At one frequency, the resonant frequency, their impedances cancel ($\omega L = 1/\omega C$) and a series RLC circuit lets the most current through. Radio tuners pick stations this way.

$$f_0 = \frac{1}{2\pi\sqrt{LC}}$$

How to do it:
1. The formula is fโ‚€ = 1 รท (2ฯ€ โˆš(L C)). Rearranged: C = 1 รท ((2ฯ€ fโ‚€)ยฒ ร— L).
2. 2ฯ€ ร— 1000 = 6283; squared that is about 39.5 million. Multiply by L = 0.01 H.
3. C is 1 divided by that. Express it in ยตF (millionths of a farad).
4. Double-click the capacitor, set the value (you can type 2.5u), and press Check answer.
Principles it rests on
Reactance of inductors and capacitors; series resonance $\omega_0 = 1/\sqrt{LC}$.
Question
With the 10 mH inductor, choose the capacitor so the circuit resonates at 1 kHz (ยฑ5 %).

Join free to take this activity

Anyone can look around, but taking an activity needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

It is part of the course Electrical engineering: from first circuits to the power grid.

Nobody has tried this yet.Be the first. Your answer starts the stats.

Only each person's first answer, given before viewing the solution, is counted.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view