Omniadisce

Get the most power out of a source

Circuit Intermediate New no attempts yet
Every real source has some internal resistance. Here a $10\ \text{V}$ source has $50\ Ω$ inside it (drawn as the resistor next to it, which you must keep). A load resistor takes power from it.

Too small a load and most of the power is wasted inside the source; too large and hardly any current flows. Somewhere in between the load gets the most power it can.

How to do it:
1. Leave the 50 Ω resistor next to the source alone: it stands for the source's own resistance.
2. Try three load values in turn (10 Ω, 50 Ω, 200 Ω); each time, hover over the load and note its power.
3. Which gives the most power? The lesson's rule says it is the value equal to the source's resistance.
4. Set that value and press Check answer.
Principles it rests on
The maximum power transfer theorem: a load gets the most power when its resistance equals the source's (Thévenin) resistance.
Question
Choose the load resistor so it receives the maximum possible power (at least 0.495 W).

Join free to take this activity

Anyone can look around, but taking an activity needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

It is part of the course Electrical engineering: from first circuits to the power grid.

Nobody has tried this yet.Be the first. Your answer starts the stats.

Only each person's first answer, given before viewing the solution, is counted.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view