Omniadisce

What capacitors and inductors do in the end

Circuit Intermediate New no attempts yet
A 10 V supply feeds a resistor, an inductor, and a 1 kΩ resistor with a capacitor across it. When you switch on, things change quickly for a moment, then settle.

In DC steady state nothing changes any more, so:
- a capacitor carries no current ($i = C\,dv/dt = 0$): it behaves like a gap;
- an inductor has no voltage across it ($v = L\,di/dt = 0$): it behaves like a wire.

The capacitor settles at 5 V in the starter.

How to do it:
1. Use the steady-state rules: the inductor becomes a wire, the capacitor becomes a gap.
2. What is left is the first resistor in series with the 1 kΩ resistor, across 10 V.
3. 4 V across 1 kΩ means a current of 4 V ÷ 1000 Ω. The same current flows through the first resistor.
4. The first resistor takes the other 6 V: R = 6 V ÷ that current.
5. Set it, let the circuit settle for a moment, and press Check answer.
Principles it rests on
$i_C = C\,dv/dt$ and $v_L = L\,di/dt$; in DC steady state a capacitor is an open circuit and an inductor a short circuit.
Question
Change the first resistor so the capacitor settles at 4 V and 4 mA flows through the inductor.

Join free to take this activity

Anyone can look around, but taking an activity needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

It is part of the course Electrical engineering: from first circuits to the power grid.

Nobody has tried this yet.Be the first. Your answer starts the stats.

Only each person's first answer, given before viewing the solution, is counted.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view