Omniadisce

A low-pass filter for 1 kHz

Circuit Intermediate New no attempts yet
An audio signal carries hiss at high frequencies. A resistor followed by a capacitor to ground passes low frequencies and shunts high ones away: a first-order low-pass filter.

The capacitor's impedance $Z_C = \frac{1}{j\omega C}$ falls as frequency rises. The cut-off frequency, where the output has dropped to $1/\sqrt{2}$ (โˆ’3 dB) and the resistor and capacitor have equal-size impedances, is

$$f_c = \frac{1}{2\pi R C}$$

How to do it:
1. The formula is f_c = 1 รท (2ฯ€ R C), so R = 1 รท (2ฯ€ f_c C).
2. Put in f_c = 1000 Hz and C = 100 nF = 0.0000001 F. 2ฯ€ is about 6.283.
3. Calculate, round to a nearby standard value, set the resistor, and press Check answer.
4. Optional: right-click the capacitor and choose View in Scope to watch the filtered wave.
Principles it rests on
Impedance of a capacitor; the RC low-pass filter's cut-off frequency $f_c = 1/(2\pi RC)$.
Question
With the 100 nF capacitor, choose R so the cut-off frequency is 1 kHz (ยฑ5 %).

Join free to take this activity

Anyone can look around, but taking an activity needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

It is part of the course Electrical engineering: from first circuits to the power grid.

Nobody has tried this yet.Be the first. Your answer starts the stats.

Only each person's first answer, given before viewing the solution, is counted.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view