Omniadisce

Replace a network with its Thévenin equivalent

Circuit Intermediate New no attempts yet
The starter is a network: a 12 V source, 6 kΩ, 3 kΩ and 2 kΩ, feeding a 4 kΩ load. The load gets 2 V.

Thévenin's theorem says that, seen from the load, any network of sources and resistors behaves exactly like *one* source $V_{Th}$ in series with *one* resistor $R_{Th}$.

- $V_{Th}$ is the voltage at the load terminals with the load removed (open circuit).
- $R_{Th}$ is the resistance seen from the load terminals with every source switched off (a voltage source becomes a wire).

How to do it:
1. Thévenin voltage: imagine the 4 kΩ load removed. The 12 V divides across 6 kΩ and 3 kΩ; the 3 kΩ's share (12 × 3 ÷ 9) appears at the load terminals.
2. Thévenin resistance: replace the 12 V source by a wire. 6 kΩ and 3 kΩ are then in parallel (product ÷ sum), and the 2 kΩ is in series with that.
3. Delete the 12 V source and the 6 kΩ, 3 kΩ and 2 kΩ resistors (click a part, press Delete).
4. Draw a new voltage source (right-click the canvas, then Inputs and Sources, then DC Voltage Source) and a resistor in series with the load, and set them to your two answers.
5. Make sure the loop is closed, hover over the load to check it has 2 V, and press Check answer.
Principles it rests on
Thévenin's theorem; the voltage divider; series and parallel resistance.
Question
Replace everything except the 4 kΩ load by one source and one resistor, so the load still gets 2 V.

Join free to take this activity

Anyone can look around, but taking an activity needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

It is part of the course Electrical engineering: from first circuits to the power grid.

Nobody has tried this yet.Be the first. Your answer starts the stats.

Only each person's first answer, given before viewing the solution, is counted.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view