Omniadisce

An inverting amplifier with gain −4.7

Circuit Intermediate New no attempts yet
In an inverting amplifier the + input is grounded, so the op-amp holds its − input at 0 V (a virtual ground). The input current $V_{in}/R_{in}$ has nowhere to go but through the feedback resistor, so

$$V_{out} = -\frac{R_f}{R_{in}}\,V_{in}$$

The starter has two 10 kΩ resistors: gain −1.

How to do it:
1. Gain = −R_f ÷ R_in. With R_in = 10 kΩ, the feedback resistor must be 4.7 times larger.
2. Double-click the feedback resistor (the one from the − input to the output) and set it.
3. Hover over the load to read about 4.7 V, then press Check answer.
Principles it rests on
Virtual ground; inverting gain $-R_f/R_{in}$.
Question
Change the feedback resistor so the 10 kΩ load gets 4.7 V from the 1 V input (gain −4.7, ±2 %), with every resistor at least 1 kΩ.

Join free to take this activity

Anyone can look around, but taking an activity needs a free account. With one, your answers are checked step by step and your progress is saved, so you can stop and pick up where you left off on any device.

It is part of the course Electrical engineering: from first circuits to the power grid.

Nobody has tried this yet.Be the first. Your answer starts the stats.

Only each person's first answer, given before viewing the solution, is counted.

Discussion 0 comments

Log in to join the discussion.

× Enlarged view